Harness Design Lead Engineer, Drive-by-Wire and Autonomy
About Forterra
At Forterra, we are unleashing autonomy at scale to transform the battlefield. Our mission is to build the foundational platforms that enable an intelligent ecosystem to coordinate, adapt, and execute with speed and precision even in the uncertainty and disruption of modern conflict. In an era marked by rapid technological change and evolving threats, we design for flexibility, survivability, and operational dominance.
Forterra delivers weapons, sensors, and battlefield effects through integrated autonomous networks reaching operational areas faster, safer, and without placing human lives at risk. Our systems operate with distributed control, dynamic routing, and real-time responsiveness, enabling sustained advantage across complex mission environments.
About the role
This role owns the electrical interconnect of our autonomous vehicles end to end: every harness that connects drive-by-wire, autonomy sensors and compute, radios, payloads and the base vehicle. You will take each harness from schematic to 3D routing to released drawings, get it built, and be on the vehicle when it goes in.
You will work with the drive-by-wire, autonomy and mechanical teams to define how power and data move through the vehicle, make the trades on gauge, shielding, connectors and topology, and carry the design from first prototype builds into production at rate. As the first harness engineer on the team, you will set how harness design is done here, then build and lead the harness team as the program grows.
What you'll do
- Own the vehicle's electrical interconnect end to end: power distribution, grounding, shielding and signal integrity across drive-by-wire, autonomy, radios, payloads and the base vehicle, including redundant paths for safety-critical functions.
- Turn system architecture into harness designs: block diagrams, schematics, wire lists and pinouts, built with the systems, drive-by-wire and autonomy engineers.
- Make the electrical trades on wire gauge, shielding, connectors and topology, backed by analysis of voltage drop, current, thermal effects, EMI and crosstalk.
- Route harnesses in 3D with the mechanical team, packaged for clearance, serviceability, assembly and motion.
- Design for high-speed data and harsh environments: automotive Ethernet, camera and sensor links, and CAN and J1939, sealed and protected against water, dust, vibration and temperature extremes to military power and EMI standards.
- Design the harness drawings the vehicles are built from: connectors, wiring, dimensions, labeling and BOM on each drawing, along with the formboard layouts, installation drawings and test procedures that go with them, ready for the shop or a supplier to build.
- Work directly with harness suppliers from quote through first article, validation testing and production at rate.
- Be on the vehicle during build-up. Support installs, troubleshoot and rework harnesses during bring-up, and feed what the build teaches you back into the design.
- Carry harnesses from prototype to production with DFM, validation and change control, so prototype designs grow into production designs without starting over.
- Start as a team of one, then build and lead the harness team: set the design standards and tools, and hire the engineers and technicians who join.
Minimum Qualifications
- Bachelor's degree in electrical or mechanical engineering, or a related field.
- 5+ years designing wire harnesses for vehicles, heavy equipment, aircraft, spacecraft or defense systems.
- You have owned harness design from schematic through released harness drawings and installation on a working vehicle or system.
- Harness design tools (Capital, E3.series, Zuken or similar) and 3D routing in NX, CATIA, Creo or SolidWorks.
- Connector, wire and shielding selection for rugged environments, and experience working directly with harness manufacturers.
- Working knowledge of vehicle networks (CAN, J1939, Ethernet), power distribution and grounding.
- Travel to test sites, suppliers, partner facilities and Government reviews, approximately 25%.
Preferred Qualifications
- Harnesses released into production at an automotive OEM or Tier 1, or on heavy truck, off-highway or military vehicle programs.
- Military connectors and standards: MIL-DTL-38999, MIL-STD-1275, MIL-STD-461 and MIL-STD-810.
- High-speed data harnessing: automotive Ethernet, camera links (GMSL, FPD-Link), and lidar and radar sensors.
- Harness validation and workmanship standards: IPC/WHMA-A-620, USCAR-21, and environmental and electrical testing.
- Redundant power and data paths for safety-critical systems, and ISO 26262 or system FMEA.
- Hands-on harness build and rework: crimping, soldering, termination, and continuity and hipot testing.
- Drive-by-wire, ADAS or autonomous vehicle programs.
- Leading or mentoring harness engineers and technicians, and setting design standards.
US Salary Range
$125,000—$200,000
The salary range for this role is an estimate and is based on a wide variety of compensation factors. The salary offered to candidates will vary based on a variety of factors including (but not limited to) relevant work experience, education, specialized training, critical expertise, training, and more. Equity in Forterra is included in most of our full-time, high-demand roles and is therefore considered part of Forterra’s overall compensation package. In addition to base salary and equity, Forterra offers competitive benefits for full-time employees including:
- Premium Healthcare Benefits: Three plan options, including an HSA-eligible plan, with Forterra covering 80% of the plan premium for you and your dependents.
- Basic Life/AD&D, short and long-term disability insurance plans 100% covered by Forterra, plus the option to purchase additional life insurance for you and your dependents.
- Extremely generous company holiday calendar including a winter break in December.
- Competitive paid time off (PTO) offering 20 days accrued per year.
- A minimum of 7 weeks fully paid parental leave for birth/adoption.
- A $9k annual tuition reimbursement or professional development stipend.
- Fully stocked beverage refrigerators with all the Celsius your little heart desires.
- 401(k) retirement savings plan, including traditional, Roth 401(k), and after-tax deferral with company match up to 4%.
Your recruiter will be able to share more information about our salary and benefits offering during the hiring process.
CLEARANCE ELIGIBILITY - This position may require eligibility to obtain and maintain a U.S. security clearance. For more information about U.S. Security Clearances: click here.
Forterra is an equal-opportunity employer, providing and promoting equal employment opportunity in all personnel practices. Forterrans are unique, talented individuals who are united through a shared passion to deliver autonomous systems that enable national resilience and a robust supply chain.
All qualified applicants will receive consideration for employment without regard to any factor, including veteran and disability status, and criminal history, in accordance with applicable local, state, and federal laws.
Forterra is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process.
To see Forterra’s candidate data privacy policy, please visit Forterra Legal | Job Applicant Privacy Notice.
Emerging Tech
Clarksburg, MD
Compartilhar no: